Started working on this to familiarize myself more with 7.6. I figured it would be fun to add sculptures, frames, paintings, etc., as I go. No materials yet.
Art Gallery
- Finis
- Captain
- Posts: 5276
- Joined: 21 May 2009, 18:26
- Type the number ten into the box: 0
- Location: North Venezuela or West Korea
- Contact:
Re: Art Gallery
Hi Joe. Happy to see a TS project.
This looks familiar: viewtopic.php?p=56359#p56359
I like your design with the small rooms inside of the big room and the steps. This setting can be a showcase for your other CG projects. They could be art in this gallery.
Steps! I'll have to use them in the redesign of my similar setting.
This looks familiar: viewtopic.php?p=56359#p56359
I like your design with the small rooms inside of the big room and the steps. This setting can be a showcase for your other CG projects. They could be art in this gallery.
Steps! I'll have to use them in the redesign of my similar setting.
- bitkar
- Captain
- Posts: 1981
- Joined: 16 Mar 2010, 07:14
- Type the number ten into the box: 0
- Location: Czech Republic
- Contact:
Re: Art Gallery
Welcome aboard, so far it looks very promising ;)
Michal aka bitkar
tS freak since tS2 (1998) and forever (tS7.61 modeler)
tS freak since tS2 (1998) and forever (tS7.61 modeler)
-
- Petty Officer Third Class
- Posts: 17
- Joined: 03 Nov 2021, 05:19
- Type the number ten into the box: 10
Re: Art Gallery
Thanks for the welcome. I hadn't seen that, but it does look similar. I watched the video, nice work!
- Finis
- Captain
- Posts: 5276
- Joined: 21 May 2009, 18:26
- Type the number ten into the box: 0
- Location: North Venezuela or West Korea
- Contact:
Re: Art Gallery
Any progress on this?
-
- Petty Officer Third Class
- Posts: 17
- Joined: 03 Nov 2021, 05:19
- Type the number ten into the box: 10
Re: Art Gallery
A little, been sidetracked with other projects. I started over in 3.2, it's easier for me.
-
- Petty Officer Third Class
- Posts: 17
- Joined: 03 Nov 2021, 05:19
- Type the number ten into the box: 10
Re: Art Gallery
Started over again in TS7 after installing it in a VM so I can remain in the safety of Linux. Still a long way to go. I'd like to replicate this metal sculpture I have hanging on the wall, how might I go about it?
Re: Art Gallery
Nice to see truespace running on a Linux !
To reproduce your sculpture, simply paint a plane with the photo of it (make sure the plane's size has the same proportion as the original picture file), put that plane on a locked layer, then draw the shapes over it using truespace's curve tools.
To reproduce your sculpture, simply paint a plane with the photo of it (make sure the plane's size has the same proportion as the original picture file), put that plane on a locked layer, then draw the shapes over it using truespace's curve tools.
-
- Petty Officer Third Class
- Posts: 17
- Joined: 03 Nov 2021, 05:19
- Type the number ten into the box: 10
Re: Art Gallery
That turned out to be a great idea, thanks. Instead of tracing though I measured the thing and did boolean subtractions, using the photo as a guide. The final result is fairly close, the sculpture has some really thin edges (like 1/32"!), and what appear to be relief cuts (presumably to allow for expansion/contraction), but I made the edges a bit thicker.
Having this in Linux is awesome. D3D was a no-go but at least the software driver works. No problems except that the rendering options always reset themselves, so no AA, etc., but I can deal. Starting to like TS7 better as I become more accustomed to it.
Having this in Linux is awesome. D3D was a no-go but at least the software driver works. No problems except that the rendering options always reset themselves, so no AA, etc., but I can deal. Starting to like TS7 better as I become more accustomed to it.