Here is an updated YafaRay4tS Setup library, Primitive Yafaray Camera, YafaRayBar Yafaray Camera toolbar button, and Yafaray Folder with an updated Background aspect
Hope you like it!
Removed
Also made a Sun Sky.RsSLgts light setup that could be included in the lights library
It is basically a light setup that does not affect an outdoor Sunky / Darktide scene that alleviates a total black D3D View
No Shadows
Removed due to update
YafaRay4tS v1.0.0
- clintonman
- Captain
- Posts: 5432
- Joined: 21 May 2009, 21:08
- Type the number ten into the box: 0
- Location: California
- Contact:
Re: YafaRay4tS v1.0.0
Can you move the Diffuse Photons and Caustic Photons down to the IBL section? These are IBL controls.trueBlue wrote: ↑26 Mar 2024, 16:17 This is what I did with the Background aspect
Background.png
.
Here is an updated YafaRay4tS Setup library, Yafaray Camera toolbar button, and Yafaray Folder with an updated Background aspect
Added IBL Cast Shadows to the top section
Hope you like it!
Also made a Sun Sky.RsSLgts light setup that could be included in the lights library
Re: YafaRay4tS v1.0.0
How is this?
30.000 .
90.000 I updated the previous post with the change
I think the Default Yafaray Smooth = 30.000, should be bumped up to at least 90.000
30.000 .
90.000 I updated the previous post with the change
- clintonman
- Captain
- Posts: 5432
- Joined: 21 May 2009, 21:08
- Type the number ten into the box: 0
- Location: California
- Contact:
Re: YafaRay4tS v1.0.0
Those 2 depend on the IBL checkbox. It's weird for them to be above it.
90.0 smooth is way too much.
Re: YafaRay4tS v1.0.0
What two are you referring to?Those 2 depend on the IBL checkbox. It's weird for them to be above it.
- clintonman
- Captain
- Posts: 5432
- Joined: 21 May 2009, 21:08
- Type the number ten into the box: 0
- Location: California
- Contact:
Re: YafaRay4tS v1.0.0
Diffuse Photons and Caustic Photons don't do anything without IBL enabled. So it's odd that they come before it. They should probably also be renamed to IBL Diffuse Photons and IBL Caustic Photons to match all the other IBL controls or make an IBL heading and remove all the IBL prefixes.
Re: YafaRay4tS v1.0.0
Probably should move the Image section above the IBL section
- clintonman
- Captain
- Posts: 5432
- Joined: 21 May 2009, 21:08
- Type the number ten into the box: 0
- Location: California
- Contact:
Re: YafaRay4tS v1.0.0
Everything in the IBL section applies to Gradient and Constant and Image.
Some IBL controls apply to the Sun Sky/Darktide sections.
So if you're going to move IBL section it would go near the bottom of the panel.
IBL is not just for images.
Re: YafaRay4tS v1.0.0
What IBL controls apply to the Sun Sky/Darktide sections?
Thats a new one I did not know about
Can you give an example?
Finally, after several attempts, I was able to move the Constant Color back to the upper area like it was before
Not easy to do!
I could make the Use IBL Constant - Gradient - Image different, like bigger and a different color
Thats a new one I did not know about
Can you give an example?
Finally, after several attempts, I was able to move the Constant Color back to the upper area like it was before
Not easy to do!
I could make the Use IBL Constant - Gradient - Image different, like bigger and a different color
- clintonman
- Captain
- Posts: 5432
- Joined: 21 May 2009, 21:08
- Type the number ten into the box: 0
- Location: California
- Contact:
Re: YafaRay4tS v1.0.0
You have the IBL enable near the top and all the IBL controls in the Image section.trueBlue wrote: ↑26 Mar 2024, 20:01 What IBL controls apply to the Sun Sky/Darktide sections?
Thats a new one I did not know about
Can you give an example?
Finally, after several attempts, I was able to move the Constant Color back to the upper area like it was before
Not easy to do!
I could make the Use IBL Constant - Gradient - Image different, like bigger and a different color
Background.png