Your Help2 was much better at explaining it's use!
Shown is a modified Preferences / Help
I removed the Panel shortcut key.
Final trueSpace7.61 Beta 8 Std Unofficial Update
- clintonman
- Captain
- Posts: 5422
- Joined: 21 May 2009, 21:08
- Type the number ten into the box: 0
- Location: California
- Contact:
Re: Final trueSpace7.61 Beta 8 Std Unofficial Update
Installed ok, no problems so far.
Did you swap the left and right buttons for object rotation in the full version? If so then it's not matching this rosetta update.
Edit: Never mind, just looked at your release notes for full version and it's not mentioned. Must have been one of my experiments.
Did you swap the left and right buttons for object rotation in the full version? If so then it's not matching this rosetta update.
Edit: Never mind, just looked at your release notes for full version and it's not mentioned. Must have been one of my experiments.
Re: Final trueSpace7.61 Beta 8 Std Unofficial Update
What Left and Right buttons?clintonman wrote: ↑05 Sep 2019, 05:04 Installed ok, no problems so far.
Did you swap the left and right buttons for object rotation in the full version? If so then it's not matching this rosetta update.
Edit: Never mind, just looked at your release notes for full version and it's not mentioned. Must have been one of my experiments.
- clintonman
- Captain
- Posts: 5422
- Joined: 21 May 2009, 21:08
- Type the number ten into the box: 0
- Location: California
- Contact:
Re: Final trueSpace7.61 Beta 8 Std Unofficial Update
Object rotation, left button around object center, right button around the axis.trueBlue wrote: ↑05 Sep 2019, 05:10What Left and Right buttons?clintonman wrote: ↑05 Sep 2019, 05:04 Installed ok, no problems so far.
Did you swap the left and right buttons for object rotation in the full version? If so then it's not matching this rosetta update.
Edit: Never mind, just looked at your release notes for full version and it's not mentioned. Must have been one of my experiments.
Re: Final trueSpace7.61 Beta 8 Std Unofficial Update
trueSpace Beta 7.61 Standalone Unofficial Update
This trueSpace Beta 7.61 Standalone Unofficial Update is for the "Standalone Version" only.
Important: This Update should not be used with the "Full Version" of trueSpace7.61 with Workspace, Model, and the Bridge!
Revisions:
July 06, 2009
February 21, 2010
November 01, 2012
May 23, 2019
September 5, 2019
Removed due to update
This trueSpace Beta 7.61 Standalone Unofficial Update is for the "Standalone Version" only.
Important: This Update should not be used with the "Full Version" of trueSpace7.61 with Workspace, Model, and the Bridge!
Revisions:
July 06, 2009
February 21, 2010
November 01, 2012
May 23, 2019
September 5, 2019
Removed due to update
Re: Final trueSpace7.61 Beta 8 Std Unofficial Update
New Update for trueSpace7.61 Beta 8 Std Unofficial Update
viewtopic.php?f=55&t=3731
Everything is included from the trueSpace7.61 Beta 8 Unofficial Update update except for Model items.
viewtopic.php?f=55&t=3731
Everything is included from the trueSpace7.61 Beta 8 Unofficial Update update except for Model items.
Re: Final trueSpace7.61 Beta 8 Std Unofficial Update
New Update for trueSpace7.61 Beta 8 Std Unofficial Update
viewtopic.php?f=55&t=3731
New - YafaRay4tSv0.9.7
viewtopic.php?f=9&t=5686#p56121
viewtopic.php?f=55&t=3731
New - YafaRay4tSv0.9.7
viewtopic.php?f=9&t=5686#p56121
Re: Final trueSpace7.61 Beta 8 Std Unofficial Update
New Update for trueSpace7.61 Beta 8 Std Unofficial Update
viewtopic.php?f=55&t=3731
YafaRay4tS Setup library
All of the preview lights and Volume object's placement in the scene were changed so they were not stacked on top of each other.
YafaRayBar
YafarayVolume button
RsFileIO.LoadObject(System.GetMainDir() + '\\Rs Main Libraries\\YafaRay4tS Setup\\YafarayVolume.RsObj', Space.CurrentScene())
YafaRay4tS
Reset the Default settings
Python_file attribute
Removed File created time stamp
Anim aspect
Changed 'Enable - Model mesh processing' to 'Model Mesh Processing'
RenderAnim2
Changed the ActiveX Question to match the name on the UI
Model Mesh Processing is unstable and trueSpace must be closed immediately after rendering. \n\nDo you wish to continue?
endAnimation
Changed the ActiveX Question to match the Create Python Script - Alert
Would you like to remove the Assigned python script from the Model scene?
Added 'Save your scene' to the Alert
IMPORTANT! Save you scene and close trueSpace now to avoid crashing!
UpdateStatus
Added 'Rendering Frame'
DoFrameRender
Changed 'External Viewer' to 'Custom Viewer" to match the UI
Note:
YafaRay4tS Scene Utilities
Does not take in account if 'Disable All Viewers' is checked.
Results, all viewers including the above are unchecked.
Restore Default Settings
Does not clear the Python_file attribute
ToDO:
YafaRay4tS
About
Change link to 'YafaRay Scenes for trueSpace7.61' or unknown History document?
YafaRay4tS Help
Decomplie add info to History and steps for Model Mesh Processing
Change above link
viewtopic.php?f=55&t=3731
YafaRay4tS Setup library
All of the preview lights and Volume object's placement in the scene were changed so they were not stacked on top of each other.
YafaRayBar
YafarayVolume button
RsFileIO.LoadObject(System.GetMainDir() + '\\Rs Main Libraries\\YafaRay4tS Setup\\YafarayVolume.RsObj', Space.CurrentScene())
YafaRay4tS
Reset the Default settings
Python_file attribute
Removed File created time stamp
Anim aspect
Changed 'Enable - Model mesh processing' to 'Model Mesh Processing'
RenderAnim2
Changed the ActiveX Question to match the name on the UI
Model Mesh Processing is unstable and trueSpace must be closed immediately after rendering. \n\nDo you wish to continue?
endAnimation
Changed the ActiveX Question to match the Create Python Script - Alert
Would you like to remove the Assigned python script from the Model scene?
Added 'Save your scene' to the Alert
IMPORTANT! Save you scene and close trueSpace now to avoid crashing!
UpdateStatus
Added 'Rendering Frame'
DoFrameRender
Changed 'External Viewer' to 'Custom Viewer" to match the UI
Note:
YafaRay4tS Scene Utilities
Does not take in account if 'Disable All Viewers' is checked.
Results, all viewers including the above are unchecked.
Restore Default Settings
Does not clear the Python_file attribute
ToDO:
YafaRay4tS
About
Change link to 'YafaRay Scenes for trueSpace7.61' or unknown History document?
YafaRay4tS Help
Decomplie add info to History and steps for Model Mesh Processing
Change above link
Re: Final trueSpace7.61 Beta 8 Std Unofficial Update
New Update for trueSpace7.61 Beta 8 Std Unofficial Update
viewtopic.php?f=55&t=3731
YafaRay4tS 'Updated 10/26/2019'
* When rendering d3d materials will look for node named "D3D material, 1" as well as "D3D material"
Changed:
Reset the Default settings
Output Render File - C:\trueSpace761Std\Image Folder\yaf_test.png
YafaRay4tS Scene Utilities 'Updated 10/26/2019'
* Incorporated into the YafaRay4tS panel
* Button for gathering textures was broken - fixed
* Process d3d shaders to copy embedded textures out to disk so the render can see them
if bitmap has no associated file, one will be created so the render can see it during the "gathering textures for sharing"
Changed:
Texture Source Folder - C:\trueSpace761Std\Textures
D3d Material Converter 'Updated 10/26/2019'
* Added a global rename to the convert d3d compiled to shader for old items using an old naming scheme
* Changed status message to use "Workspace" instead of "YafaRay"
* Was hard coded to find the material connected to a specific connector, "Mat Item 0", fixed by general search for "Mat Item X" - this gives better compatibility with lightworks materials which can be plugged into any of the Mat Item connectors
ToDO:
YafaRay4tS
About
Change link to 'YafaRay Scenes for trueSpace7.61' or unknown History document?
YafaRay4tS Help
Decomplie add info to History and steps for Model Mesh Processing
Change above link
viewtopic.php?f=55&t=3731
YafaRay4tS 'Updated 10/26/2019'
* When rendering d3d materials will look for node named "D3D material, 1" as well as "D3D material"
Changed:
Reset the Default settings
Output Render File - C:\trueSpace761Std\Image Folder\yaf_test.png
YafaRay4tS Scene Utilities 'Updated 10/26/2019'
* Incorporated into the YafaRay4tS panel
* Button for gathering textures was broken - fixed
* Process d3d shaders to copy embedded textures out to disk so the render can see them
if bitmap has no associated file, one will be created so the render can see it during the "gathering textures for sharing"
Changed:
Texture Source Folder - C:\trueSpace761Std\Textures
D3d Material Converter 'Updated 10/26/2019'
* Added a global rename to the convert d3d compiled to shader for old items using an old naming scheme
* Changed status message to use "Workspace" instead of "YafaRay"
* Was hard coded to find the material connected to a specific connector, "Mat Item 0", fixed by general search for "Mat Item X" - this gives better compatibility with lightworks materials which can be plugged into any of the Mat Item connectors
ToDO:
YafaRay4tS
About
Change link to 'YafaRay Scenes for trueSpace7.61' or unknown History document?
YafaRay4tS Help
Decomplie add info to History and steps for Model Mesh Processing
Change above link