Final trueSpace 7.61 Beta 8 Unofficial Update

[trueBlue]

Here is a semi final version of the Final Update.
Steps to install:
Download the tS761B8 Final Update.zip file and unzip the tS761B8 Final Update.exe


1.) Run the tS761B8 Final Update.exe
2.) Browse ... to where you installed C:\trueSpace761, select it's folder and then the Extract button.
3.) Select the Yes to All button.
4.) Open trueSpace and select the Reset to Default Context icon and then the Default layout.

Forum will not allow me to upload the file as it is to large. It's only 27 MG
Removed due to update.

[clintonman]

...

Forum will not allow me to upload the file as it is to large. It's only 27 MG

I'll take a look later. How big was the old installer?

[clintonman]

It looks like the upload limit was set to 5Mb. I changed it to 35Mb for the forums. Haven't checked the website limits, so try it and see if it works.

[trueBlue]

Thanks Clinton!
I downloaded 7-Zip and that brought the file size down 9 MB.
Updated the previous post and file attached.

[trueBlue]

The last posted semi final update has been removed. It had a few issues that I have corrected.
You can find the new version in the first post:
viewtopic.php?f=4&t=5411&start=30#p51638
Note: The Material Editor has been updated to a newer version.
Updated the post to reflect the new and additional changes.

[clintonman]

I don't see any downloads in your posts.

[trueBlue]

You can find the new version in the first post:
viewtopic.php?f=4&t=5411&start=30#p51638

[clintonman]

You can find the new version in the first post:
viewtopic.php?f=4&t=5411&start=30#p51638

I think the link should be
viewtopic.php?f=4&t=5411&start=p51638
or
https://united3dartists.com/forum/v ... art=p51638

without the 30#

[trueBlue]

Interesting, it works for me and not others?
If it was your understanding that this is the final release then I understand, but it is not.
This is a semi final version of the Final Update and was hoping to get some feed back and or some users to test it before it gets released officially. I found another issue and corrected it. Uploaded the new file in the first post in this thread.

Very curious how the layouts are showing on other users monitors.
When I made the last update, I had a smaller monitor.
I did not change any of the window sizes in either layout libraries.
My monitor resolution is 1080p, 1920 x 1080.
The stack's width should be set at 224 to accommodate the new Main2 toolbar, which I did not set.
Not sure what would be best for different users.
Note: Both the Old and New layouts exist in the Library.
Presently the Layouts - Configurations is being used which is the new layouts.
Testing switching layouts, I discovered tS761 only works with one name, as in Layouts - Configurations
To load the OLD layouts you have to rename them in the Library Browser.
1.) Rename Layouts - Configurations to Layouts - ConfigurationsNEW
2.) Rename Layouts - ConfigurationsOLD to Layouts - Configurations
3.) Select the Default layout tab.
Note: You can tell the differences of the layouts by their icons.

[Emmanuel]

it works for me and not others?

The update works for me on a fresh install. Nice layout. I like that.

It didn't worked at first on an old one loaded with Clintons scripts and other stuff, so I had to re-install tS7.61.