Unofficial Update Documentation Manual
- borgcone
- Chief Petty Officer
- Posts: 116
- Joined: 06 May 2018, 21:09
- Type the number ten into the box: 10
- Location: Japan, or sometimes behind a borg cube
Re: Unofficial Update Documentation Manual
Very sorry, I have misunderstood the selector sphere - LB click: "show/hide rotary control" is correct as original says. (The 3 colored control to rotate whole object remains whether we LB click the sphere or not)
(I added also a correction text of Y-axis that follows the previous image)
(Edited to add)
Curiously, Move RB (any shaft) in Workspace moves along Z axis now as I wrote in the 1st proposal .svg unless Z is locked. I'm not sure Z lock was off when I saw RB did nothing. There might be some sort of switch other than Z-lock if both you and I have not locked Z. (Disabling Z in Model side seems not to affect to Z lock in Workspace and Move RB action. I checked that a couple of minutes ago)
(I added also a correction text of Y-axis that follows the previous image)
(Edited to add)
Curiously, Move RB (any shaft) in Workspace moves along Z axis now as I wrote in the 1st proposal .svg unless Z is locked. I'm not sure Z lock was off when I saw RB did nothing. There might be some sort of switch other than Z-lock if both you and I have not locked Z. (Disabling Z in Model side seems not to affect to Z lock in Workspace and Move RB action. I checked that a couple of minutes ago)
borgcone ... or 3DfromNULL at https://biglode.com/ptsxpy
- clintonman
- Captain
- Posts: 5430
- Joined: 21 May 2009, 21:08
- Type the number ten into the box: 0
- Location: California
- Contact:
Re: Unofficial Update Documentation Manual
I see what you mean. It looks like it only works in the Anim View, Story tab.
- clintonman
- Captain
- Posts: 5430
- Joined: 21 May 2009, 21:08
- Type the number ten into the box: 0
- Location: California
- Contact:
Re: Unofficial Update Documentation Manual
Update Feb 20 2022
Many changes including removal of Synchronize and replaced image in Quick Guide for the object navigation controls from borgcone.
Now up to date with the Feb 13, 2022 UU release.
http://clintons3d.com/plugins/truespace ... .html#docs
Many changes including removal of Synchronize and replaced image in Quick Guide for the object navigation controls from borgcone.
Now up to date with the Feb 13, 2022 UU release.
http://clintons3d.com/plugins/truespace ... .html#docs
- clintonman
- Captain
- Posts: 5430
- Joined: 21 May 2009, 21:08
- Type the number ten into the box: 0
- Location: California
- Contact:
Re: Unofficial Update Documentation Manual
Updated the docs to the March 5 UU release
- clintonman
- Captain
- Posts: 5430
- Joined: 21 May 2009, 21:08
- Type the number ten into the box: 0
- Location: California
- Contact:
Re: Unofficial Update Documentation Manual
I'm starting a new TODO list since I found missing information in the original manuals.
Current UU docs page 8 shows the View Navigation Controls.
I just found out that rotate control will roll the view(rotate in Z) when RMB is used.
Shift + LMB on the rotate control will rotate around the eye
Ctrl + LMB on the rotate control will rotate around the scene origin(0,0,0)
the text "Shift + RB" should be "Shift + RB click"
The red bar labelled "LB Rotate YZ" rotates in one direction with LMB and perpendicular when Shift + LMB, I don't know which is which Y or Z
tS7.1 has an extra control for moving the view widget, docs say RMB for "control properties", but RMB is not included in that control surface(the little white sphere)
Current UU docs page 8 shows the View Navigation Controls.
I just found out that rotate control will roll the view(rotate in Z) when RMB is used.
Shift + LMB on the rotate control will rotate around the eye
Ctrl + LMB on the rotate control will rotate around the scene origin(0,0,0)
the text "Shift + RB" should be "Shift + RB click"
The red bar labelled "LB Rotate YZ" rotates in one direction with LMB and perpendicular when Shift + LMB, I don't know which is which Y or Z
tS7.1 has an extra control for moving the view widget, docs say RMB for "control properties", but RMB is not included in that control surface(the little white sphere)
- clintonman
- Captain
- Posts: 5430
- Joined: 21 May 2009, 21:08
- Type the number ten into the box: 0
- Location: California
- Contact:
Re: Unofficial Update Documentation Manual
Attached shows the indicated changes for page 8.clintonman wrote: ↑18 Jun 2022, 20:55 I'm starting a new TODO list since I found missing information in the original manuals.
Current UU docs page 8 shows the View Navigation Controls.
I just found out that rotate control will roll the view(rotate in Z) when RMB is used.
Shift + LMB on the rotate control will rotate around the eye
Ctrl + LMB on the rotate control will rotate around the scene origin(0,0,0)
the text "Shift + RB" should be "Shift + RB click"
The red bar labelled "LB Rotate YZ" rotates in one direction with LMB and perpendicular when Shift + LMB, I don't know which is which Y or Z
tS7.1 has an extra control for moving the view widget, docs say RMB for "control properties", but RMB is not included in that control surface(the little white sphere)
Including removing the extra triangles? and RMB to roll the view
- clintonman
- Captain
- Posts: 5430
- Joined: 21 May 2009, 21:08
- Type the number ten into the box: 0
- Location: California
- Contact:
Re: Unofficial Update Documentation Manual
Page 67 Boolean Options Panel added Restore - Object Render Attributes, March 17 UU release
- clintonman
- Captain
- Posts: 5430
- Joined: 21 May 2009, 21:08
- Type the number ten into the box: 0
- Location: California
- Contact:
Re: Unofficial Update Documentation Manual
page 162, changes to the Shear tool from May 4 UU release
- clintonman
- Captain
- Posts: 5430
- Joined: 21 May 2009, 21:08
- Type the number ten into the box: 0
- Location: California
- Contact:
Re: Unofficial Update Documentation Manual
I did a survey and here is the updated todo list for the docs:
release date and description
Sep 2 Hierarchy tools, Webserver and SceneView2
Sep 21 optdetectors - maybe add a footnote or link to docs if they are included
Sep 26 encapsulation panels and options
Oct 5 help menu close buttons
Oct 7 new image for align panel
Oct 8 gold toolbar change
Oct 24 dimensions
edit: just did an animation test and shear values don't animate, even though they are a part of the matrix. will note it as a bug in the shear section
release date and description
Sep 2 Hierarchy tools, Webserver and SceneView2
Sep 21 optdetectors - maybe add a footnote or link to docs if they are included
Sep 26 encapsulation panels and options
Oct 5 help menu close buttons
Oct 7 new image for align panel
Oct 8 gold toolbar change
Oct 24 dimensions
edit: just did an animation test and shear values don't animate, even though they are a part of the matrix. will note it as a bug in the shear section
Re: Unofficial Update Documentation Manual
It is possible with a Euler .clintonman wrote: ↑29 Oct 2022, 04:02 edit: just did an animation test and shear values don't animate, even though they are a part of the matrix. will note it as a bug in the shear section