NURBS Curves and Sweep Curve for workspace
- clintonman
- Captain
- Posts: 5428
- Joined: 21 May 2009, 21:08
- Type the number ten into the box: 0
- Location: California
- Contact:
NURBS Curves and Sweep Curve for workspace
Script installer and documentation is here:
http://www.clintons3d.com/plugins/trues ... urves.html" onclick="window.open(this.href);return false;
Last edited by clintonman on 21 Nov 2015, 21:32, edited 1 time in total.
Re: NURBS Curves and Sweep Curve for workspace
Nice Clinton!
Re: NURBS Curves and Sweep Curve for workspace
yes very nice Cinton..
- clintonman
- Captain
- Posts: 5428
- Joined: 21 May 2009, 21:08
- Type the number ten into the box: 0
- Location: California
- Contact:
Re: NURBS Curves and Sweep Curve for workspace
Update June 3 2012:
Right click on the load script will save workspace curves to cob and scn formats. I think this should work well for creating curve networks in workspace that can be skinned into NURBS surfaces in modelspace.
Right click on the load script will save workspace curves to cob and scn formats. I think this should work well for creating curve networks in workspace that can be skinned into NURBS surfaces in modelspace.
- clintonman
- Captain
- Posts: 5428
- Joined: 21 May 2009, 21:08
- Type the number ten into the box: 0
- Location: California
- Contact:
Re: NURBS Curves and Sweep Curve for workspace
Update: November 2015
SVG import
supports closed curves
exports multiple curves to cob format instead of scn, so easier to get into an existing truespace scene
little bit easier to use
The curve import is slightly updated version of the SVG import script.
I update the links in the original post.
SVG import
supports closed curves
exports multiple curves to cob format instead of scn, so easier to get into an existing truespace scene
little bit easier to use
The curve import is slightly updated version of the SVG import script.
I update the links in the original post.
- clintonman
- Captain
- Posts: 5428
- Joined: 21 May 2009, 21:08
- Type the number ten into the box: 0
- Location: California
- Contact:
Re: NURBS Curves and Sweep Curve for workspace
May 2, 2019
Updated the add control point script so it does not alter the selection mode or the selection tool.
I also found that it's easiest to use rectangle selection in context mode for the curves in general.
Updated the add control point script so it does not alter the selection mode or the selection tool.
I also found that it's easiest to use rectangle selection in context mode for the curves in general.
- clintonman
- Captain
- Posts: 5428
- Joined: 21 May 2009, 21:08
- Type the number ten into the box: 0
- Location: California
- Contact:
Re: NURBS Curves and Sweep Curve for workspace
Update
option for evenly spaced points along the curve
position along the curve control - value of 0 to 1 outputs to a matrix that will make the connected object position and orient itself along the curve. Can be used to make something animate on the curve path.
- clintonman
- Captain
- Posts: 5428
- Joined: 21 May 2009, 21:08
- Type the number ten into the box: 0
- Location: California
- Contact:
Re: NURBS Curves and Sweep Curve for workspace
Update October 8 2019
sweep path script works with rotated meshes, smooth sweep geometry and slightly improved cross section orientations along the curve
sweep path script works with rotated meshes, smooth sweep geometry and slightly improved cross section orientations along the curve
- clintonman
- Captain
- Posts: 5428
- Joined: 21 May 2009, 21:08
- Type the number ten into the box: 0
- Location: California
- Contact:
Re: NURBS Curves and Sweep Curve for workspace
Update August 2020
SVG import works with reflection type curve path tags s, S, t, and T
now reads the single line DTD, so manual edit of some svg files from adobe illustrator is not needed before importing
installer updated to clear the recent files lists
Biggest change for this release is that it will read all curve types now.
http://clintons3d.com/plugins/truespace ... urves.html
SVG import works with reflection type curve path tags s, S, t, and T
now reads the single line DTD, so manual edit of some svg files from adobe illustrator is not needed before importing
installer updated to clear the recent files lists
Biggest change for this release is that it will read all curve types now.
http://clintons3d.com/plugins/truespace ... urves.html