Bleak Orbital Terminal - WIP Part 4
- Finis
- Captain
- Posts: 5262
- Joined: 21 May 2009, 18:26
- Type the number ten into the box: 0
- Location: North Venezuela or West Korea
- Contact:
Re: Bleak Orbital Terminal - WIP Part 4
How did you make the window parts so that they fit together?
The more laws, the less justice. -- Marcus Tullius Cicero
- marcel
- Captain
- Posts: 2247
- Joined: 21 May 2009, 19:52
- Type the number ten into the box: 0
- Location: paris - France
Re: Bleak Orbital Terminal - WIP Part 4
It's very simple. Here is an example to model Figure 3.
1 - duplicate A and the cylinder. subtract the cylinder to A. Intersect A and the cylinder.
2 - duplicate A and B. create an other cylinder (or what you want). Duplicate the cylinder (you need 4 cylinder this time). Repeat the step 1 between A and the new cylinder and between B and the new cylinder.
3 - The result: the 4 parts fit togheter. You can repeat this until you have all the parts you need. Remember to duplicate the objects you use before do the bolean operation.
It seem complex but it is very simple with a little practice.
everything I do is always very simple.
1 - duplicate A and the cylinder. subtract the cylinder to A. Intersect A and the cylinder.
2 - duplicate A and B. create an other cylinder (or what you want). Duplicate the cylinder (you need 4 cylinder this time). Repeat the step 1 between A and the new cylinder and between B and the new cylinder.
3 - The result: the 4 parts fit togheter. You can repeat this until you have all the parts you need. Remember to duplicate the objects you use before do the bolean operation.
It seem complex but it is very simple with a little practice.
everything I do is always very simple.
Design - illustration - Animation
http://www.crea-vision.fr
http://www.crea-vision.fr
- marcel
- Captain
- Posts: 2247
- Joined: 21 May 2009, 19:52
- Type the number ten into the box: 0
- Location: paris - France
Re: Bleak Orbital Terminal - WIP Part 4
To destroy the windows by starting at the center I use two sphere. The first do the impact. I also put a wall behind the window to prevent debris from returning into the building.
Design - illustration - Animation
http://www.crea-vision.fr
http://www.crea-vision.fr
- marcel
- Captain
- Posts: 2247
- Joined: 21 May 2009, 19:52
- Type the number ten into the box: 0
- Location: paris - France
Re: Bleak Orbital Terminal - WIP Part 4
The big sphere continue the movment to create the illusion the glass inflates before break. Some pieces of glass in the corners of the window are not affected by the sphere
Design - illustration - Animation
http://www.crea-vision.fr
http://www.crea-vision.fr
Re: Bleak Orbital Terminal - WIP Part 4
Marvelous Marcel..... wow... almost a T-Shirt logo in the making....
- marcel
- Captain
- Posts: 2247
- Joined: 21 May 2009, 19:52
- Type the number ten into the box: 0
- Location: paris - France
Re: Bleak Orbital Terminal - WIP Part 4
thank v3rd3.
To hold the pieces of glass near the edges of the window, the glass is sandwiched between two frames with a small space so they can move slightly but not separate from the frame.
soon, animation accentuate the effect with motion blur. Then I'd do a few micro debris and a flash with post process. The sound will be fun to do.
To hold the pieces of glass near the edges of the window, the glass is sandwiched between two frames with a small space so they can move slightly but not separate from the frame.
soon, animation accentuate the effect with motion blur. Then I'd do a few micro debris and a flash with post process. The sound will be fun to do.
Design - illustration - Animation
http://www.crea-vision.fr
http://www.crea-vision.fr
- LeonRegis
- Captain
- Posts: 1946
- Joined: 18 Aug 2009, 17:36
- Type the number ten into the box: 0
- Location: Brazil/Earth/Orion Arm/Milky Way/4th Dimension/This Universe/Multiverse???/Singularity???
Re: Bleak Orbital Terminal - WIP Part 4
Am I already said that you are a master?
Be the change you want to see in the world. - Mohandas Gandhi
- marcel
- Captain
- Posts: 2247
- Joined: 21 May 2009, 19:52
- Type the number ten into the box: 0
- Location: paris - France
Re: Bleak Orbital Terminal - WIP Part 4
i don't think so.
the best leg length is when the feet touch the ground. That's my philosophy.
My next effect for the animation will make the water that flows between objects. Yes, we can do this with TrueSpace modelside!
the best leg length is when the feet touch the ground. That's my philosophy.
My next effect for the animation will make the water that flows between objects. Yes, we can do this with TrueSpace modelside!
Design - illustration - Animation
http://www.crea-vision.fr
http://www.crea-vision.fr
- marcel
- Captain
- Posts: 2247
- Joined: 21 May 2009, 19:52
- Type the number ten into the box: 0
- Location: paris - France
Re: Bleak Orbital Terminal - WIP Part 4
The animation of broken glass with sound. the little fragments are created by post process. I think to do several scenes like this and each scene will be faster than the previous.
- Attachments
-
- broken_glass_sound.zip
- (1.37 MiB) Downloaded 329 times
Design - illustration - Animation
http://www.crea-vision.fr
http://www.crea-vision.fr
- Breech Block
- Master Chief Petty Officer
- Posts: 482
- Joined: 13 Jun 2009, 20:31
Re: Bleak Orbital Terminal - WIP Part 4
I have really enjoyed following this thread and seeing your amazing tornado in action, something that has been on my own To Do list ever since seeing Twister starring Bill Paxman and Helen Hunt. So this has ben a fantastic inspiration for me. Are there any updates for this great thread?